Wholesale luxury other white wreath christmas decorations

wholesale luxury christmas decoration,With Christmas approaching, it's time to decorate our home with Christmas trees and all kinds of decorations, such as nutcrackers, ribbons, Christmas deer, colored lights and silk stockings usually used to hold gifts. However, the spring of all these decorations requires a lot of money, and these decorations will soon be idle in the rest of the day. So maybe we can make these Christmas decorations ourselves. Let's start with Christmas deer decoration.

 

wholesale other christmas decorations,Raw materials and tools

 

wholesale other christmas decorations,Light brown imitation lamb flannel, brown flannel, light brown flannel, red half round beads and black half round beads, bell, cotton, scissors, needle and thread, glue and key chain.

 

Step 1:

 

wholesale white christmas decorations,Cut the two pieces of cloth into rectangles of the same size with scissors, and then overlap them on a flat desktop. Draw an ellipse on the top fabric, but draw a straight line at the bottom of the ellipse.

 

Step 2:

 

wholesale wreath christmas decoration,Sew the two pieces of cloth with needle and thread according to the elliptical coil. Note that there is no need to sew at the bottom. Form a small oval pocket.

 

Step 3:

 

Sew the bottom with a small disc, but leave a small hole to plug the cotton.

 

Step 4:

 

Fill enough cotton and sew the entrance. In this way, the body part of the Christmas deer is completed.

 

Step 5:

 

Draw a Christmas Antler on two pieces of brown cloth and sew them together with needle and thread, but there is still no cotton at the bottom. Repeat the above steps to make another Christmas antler.

 

Step 6:

 

Glue the two Christmas antlers to the Christmas deer. Be sure to determine the position. Otherwise, your furry toy will look strange.

 

Step 7:

 

wholesale luxury christmas decoration,Draw a semicircle on two pieces of camel colored cloth, sew them together with needle and thread, and finally cut the semicircle with scissors according to the needle and thread. Repeat this step to make Christmas deer ears again.

 

Step 8:

 

Put two Christmas deer ears on both sides of the Christmas antlers.

Step 9:

 

Take a piece of red cloth, draw a circle, cut it off and sew it up, but leave a small hole. Then fill the cotton into the cloth and sew it together with needle and thread. Then the red nose of the Christmas deer will be ready. We also want to put this red ball on the face of the Christmas deer.

 

Step 10:

 

Glue the semicircular black beads over the nose of the Christmas deer.

 

Step 11:

 

Cut off a slender scarf, glue it and wear it on the Christmas deer.

 

Step 12:

 

Hang the little bell on the red scarf to add a festive atmosphere.

 

Step 13:

 

wholesale other christmas decorations,The last step is to stick the key ring on the head of the plush toy so that you can hang it on the Christmas tree during the holiday and decorate your bag for the rest of the day.

 

wholesale white christmas decorations,With enough free time, you must get a lot of fun from doing it yourself. If you don't have time to do so, we also provide you with Plan B, the spring of factory Christmas decorations. You can get a lot of decorations at a fairly cheap price. We also use years of experience in making Christmas decorations to provide this service. If you are interested, please click here.

 

wholesale wreath christmas decoration,Make your private area full of Christmas celebrations through the Christmas decorative lights outside the house. Before starting decoration, it is very important to select lights. In this regard, we provide you with some tips for decorating the exterior with lights.

 

wholesale luxury christmas decoration,Make sure the style of Christmas lighting is consistent with your home style

 

Here are some things to consider before OEM Christmas decorative lights:

 

wholesale other christmas decorations,If it's a Victorian house, don't exaggerate. Elegance is the key. Surrounding the building's features with a string of light bulbs will make it more beautiful and make your house a landmark for celebrating festivals.

 

For plain or simple houses, just place lights on the edge of the roof, on both sides of the fence and the entrance.

 

wholesale white christmas decorations,The decoration of hybrid houses adopts the same theoretical basis as Victorian houses, but less emphasis should be placed on "corners and corners". The light string needs to be placed at the edge of the roof, wrapped around the column and along the corridor railing.

 

wholesale wreath christmas decoration,Decoration concept

 

Google it, or check some magazines to find the right idea for you. You can also refer to some picture websites.

 

 

Refer to other people's decorations. Don't copy it all, or the other party and you will be embarrassed.

 

Prepare lighting and decorative areas

 

Carefully check the lamps before starting

 

Before taking it up the ladder, make sure that all the bulbs are working and that the wires are not worn. If a damaged wire is found, just replace the entire wire. This is by no means easier than fighting a fire. Don't try to fix it.

 

wholesale other christmas decorations,Place the power supply close to the edge of the roof

 

wholesale luxury christmas decoration,It can be placed in the corridor because most houses don't have power sockets on the roof. You need at least one good external wire. Select an external wire compatible with the lamp string and ensure that it can withstand the wind and rain.

 

Use the correct tools

 

Use reliable, sturdy ladders and get help if possible. Exterior lamps require substantial lifting, careful placement and calibration. It's easier if you have one or two assistants.

 

wholesale other christmas decorations,If you work alone, use a basket with handles to lower and lower the material. Place the bucket by nailing a nail or S-hook on the ladder to reduce the frequency of climbing up and down.

 

wholesale white christmas decorations,Install the fasteners

 

wholesale other christmas decorations,Pre installed hooks or fasteners for fixing wires and bulb wires will make it easier to install bulbs. Place the firmware at equal intervals, and the distance is the same as that of the small lights on the line. (this step must be completed before installing the lamp. In addition, it is recommended to select a product specially used for placing wires)

 

wholesale other christmas decorations,Start installing Christmas lights

 

a chandelier

 

wholesale other christmas decorations,Start with the power supply and follow the firmware until you need it. Hang up one before inserting the next. Please remember, do not connect more than three wires at a time, otherwise it is likely to overload and catch fire.

 

Note that the light string is firmly placed on or in the firmware. Don't let the wind, birds or small animals disperse them, or you will die!

 

wholesale white christmas decorations,Review work

 

wholesale wreath christmas decoration,When you're done, turn on the lights on the ground and have a look from a distance. Check the symmetry of the light and ask someone else to help you.

 

Column: combining the lamp string with the festival wreath (artificial or natural) can make it easier for you to clean up the column. The increased volume of the wreath can prevent the lamp string from falling off.

 

wholesale luxury christmas decoration,Corridor railings: use rubber or plastic rod fasteners (for roof) along the outer top of the porch (looks like a half wall after completion). Note: if these fasteners are used on concrete or gypsum walls, they may not work properly.

 

Window: around the window, the top and bottom are decorated in the same way.

 

Railing: the same as decorative corridor railing.

 

Tree: there are many ways. For each type, use traditional packaging, like indoor trees, or use a light net hanging from the top of the tree. It can also be connected to heavy-duty extension lines and various line switches with a wire, and decorated with white or colored lights on each branch. Use plastic cables to ensure the safety of tree lights.

 

Note: after all lamps are decorated, be sure to wash your hands to prevent lead in PVC materials from remaining on your hands.