wholesale christmas lights decor, customized christmas lights decor, christmas decoration light factory

Make your own private area full of Christmas celebrations through Christmas decoration light outside the house. Before you start decorating, choosing lights is very important. In this regard, we have some tips for you to decorate the outside by lights.

Make sure that the style of the Christmas lighting is consistent with your home style

Here are some things to consider before oem christmas decoration light :

If it is a Victorian house, there is no need for exaggeration. Elegance is the key. Surrounding the features of the building with a string of light bulbs will make it more beautiful and make your house a landmark building around to celebrate the holidays.

For a rustic or simple house, you only need to place lamps on the roof edge, fence, and both sides of the entrance.

The decoration of the mixed style house adopts the same theoretical basis as the Victorian style house, but it should be placed less in "corners and corners". The string of lights needs to be placed on the edge of the roof, wrapped around the pillars and along the corridor railing.

Decorating ideas

Google it, or check some magazines to find an idea that suits you. You can also refer to some photo websites.

Refer to other people's decorations. Don't copy them all, otherwise the other party and you will be embarrassed.

Prepare lights and decorative areas

?Check the lamps carefully before you start

Before taking it up the ladder, make sure all bulbs are working and there are no areas of wear in the wires. If you find a damaged wire, simply replace the entire wire. This is definitely simpler than rescuing the fire. Don't try to repair it.

?Place the power supply closer to the edge of the roof

It can be placed in the corridor, because most houses will not have a power outlet on the roof. You need at least one good external wire. Choose an external wire that is compatible with the light string and make sure it can withstand wind and rain.

?Use the right tools

Use a reliable, sturdy ladder, and if possible, get a helper. External lamps require a lot of lifting, careful placement and calibration. It will be easier if you have one or two helpers.

If you work alone, use a basket with handles to lower and lower your materials. Put a nail or S-hook on the ladder to place the bucket to reduce the frequency of climbing up and down.

?Install fasteners

Pre-installed hooks or firmware to fix the wires and bulb cords will make it much easier to install the bulb. Place the firmware at even intervals, the distance is the same as the distance of the small lights on the line. (This step must be completed before installing the lights. In addition, it is recommended to choose products designed specifically for placing wires)

Start to install Christmas decoration light

?Hanging lights

Start from the power source and follow the firmware until you need it. Hang one first, and then insert the next one. Remember, do not connect more than three wires at a time, otherwise it is very likely to overload and catch fire.

Note that the light string is firmly placed on or in the firmware. Don't let the wind, birds or small animals disperse them, or you will die! 

?Review work

After finishing it, turn on the light on the ground and look at it from a distance. Check the symmetry of the light and ask others to help you.

Pillars: combining the string of lights with holiday garlands (artificial or natural) can make it more convenient for you to pack the pillars. The increased volume of the garland can prevent the string of lights from falling off.

Corridor railing: Use rubber or plastic rod-type fasteners (the ones used on the roof) along the top outside of the porch (it looks like a half wall when it is finished). Note: These fasteners may not work well if they are used on concrete or plaster walls.

Window: Around the window, the top and bottom are decorated in the same way.

Railings: same as decorative corridor railings.

Tree: There are various methods. For each type, use traditional packaging, just like indoor trees, or use light nets hanging from the top of the tree. You can also use a wire connected to a heavy-duty extension cord and various line switches, and use white or colored lights on each branch to decorate. Use plastic cables to ensure the safety of lights on trees.

Note: After finishing all the decoration of the lamps and lanterns, be sure to wash your hands to prevent the lead in the PVC material from staying on your hands.

Tips

• LED lights will be more environmentally friendly and easy to use.
• The style is unified, and the main color is determined.
• For lawns with a large space, you can get cute Christmas ornament that fits your home decoration style from your christmas deer decoration factory.

wholesale christmas lights decor, customized christmas lights decor, christmas decoration light factory